Digital Signal Processing · FIR and IIR filter design
Work throughout with sampling period T=1
Problem
Digital Signal Processing practice problemWork throughout with sampling period . The bilinear map isThe analog prototype is the first-order lowpassA digital design frequency is said to be prewarped when the analog cutoff is chosen as .
1. Let . Compute the prewarped analog cutoff
and substitute the bilinear map into . Reduce the result toand prove that the gain identity
holds.
2. Locate the pole of . Prove that it equals and that
this pole lies strictly inside the unit circle. Evaluate and . Using either the analog half-power identity or a direct evaluation on the unit circle, prove that
.
3. Now drop prewarping and set before the same bilinear
substitution. Prove that the digital frequency at which the resulting transform has analog image (hence magnitude ) is , not .
4. Audit both sentences: (i) “prewarping is optional because bilinear
already preserves the analog cutoff ”; (ii) “the pole lies outside the unit circle, so is unstable, or else so the filter is not lowpass.”
Do not replace the design by a filter-length versus transition-width tradeoff, and do not invoke a coefficient-quantized pole-sensitivity realization.
Hint
HintPrewarping is . Clear the bilinear denominator and divide numerator and denominator by .
Check your work
Work the problem yourself first. Then open it in Training to check your answer and read the full worked solution.
The answer check and full solution for this problem come with ProofAnvil Practice membership ($19 USD monthly). See membership. Or start with the free Digital Signal Processing sample problem: Try the free sample problem.
More Digital Signal Processing practice problems
- Let x[n]=cos(πn/3) for n ∈ ℤ, and let L=3Sampling, multirate, and polyphase processing
- Reuse the length-8 sequence x=(1,2,3,4,0,0,0,0) of the previous packetDFT, FFT, and spectral leakage